• Examining the Toll of Poor Office Lighting

    In the workplace, a great deal of focus is put on using the latest computer technology and choosing ergonomic office furniture. However, the importance of good lighting is often overlooked. If you’re considering calling an electrician to upgrade your commercial lighting in San Jose , then watch this video to learn about the toll that poor office lighting can take.

    Bad lighting can refer to insufficient lighting, but it is often lighting that is too bright or has the wrong spectrum. Inadequate lighting can cause eye strain and affect your sleep, mood, and health, each of which may lead to poor work performance. To remedy bad lighting in your office, contact an electrician about LED lighting installation.

  • What Causes Circuit Breakers to Trip?

    Tripped circuit breakers are electrical issues that most homeowners face at least once. If you’ve run into this problem with one of your circuit breakers in San Jose , then read on to learn about some of the possible causes.

    Purpose of Circuit Breakers

    Circuit breakers play an incredibly important role in protecting you, your family, and your property. The purpose of these safety devices is to cut off the flow of the electricity through an electrical circuit when the current running through it gets too high. By doing this, circuit breakers can help protect your property from electrical fires.

    Causes of Tripped Circuit Breakers Circuit Breakers

    An overloaded circuit is the most common cause of a tripped circuit breaker. In this situation, more electrical load is trying to go through the circuit than is safe, and this problem is caused by plugging in too many devices. As each of the devices is turned on, more and more electrical current runs through the circuit until it exceeds safe levels, causing the breaker to trip. Another common cause of a tripped circuit breaker is a short circuit. One type of short circuit occurs when one of the wires leading to the power plant, called a hot wire, touches another hot wire or the wire leading into the ground, called the neutral wire, which can allow too much current to run through the wire. Short circuits can also be caused by problems like ground faults, faulty wiring installation, damage to an electrical component, or plugging in an improperly wired device.

    Troubleshooting a Tripped Circuit Breaker

    If one of your circuit breakers trips repeatedly, then start considering what devices you are using. If you have several devices plugged in and drawing power from a single circuit, then unplug all but one of these. After doing this, if the breaker doesn’t trip again, then an overloaded circuit is probably the problem. If unplugging devices doesn’t solve the issue, then you may be dealing with a short circuit and should have an electrician look at your breaker box.

  • Spotlight on the Role of the Electrician in Your Home Remodel

    There is a lot to think about when it comes to home renovations, and among the most important of these is the electrical system. Depending on the project, your home’s wiring may need to be addressed to account for the structural changes or new construction. For this reason, it’s important that you consult a home remodeling electrician in San Jose and learn what modifications or upgrades will need to be made to your electrical system. Also, by addressing the electrical aspects of the project early on, you can avoid having to make costly or time-consuming changes after beginning the remodel.

    An electrician will be able to assist you with the electrical aspects of just about any home remodeling project, such as those for bathrooms, kitchens, basements, offices, dens, and room additions. Also, your electrician will be able to address everything from adding new circuits to rewiring your new home. Lastly, because electrical work should not be completed by inexperienced individuals, remember that upgrades like these should be left to the professionals.

    electrical remodeling

  • Recognizing the Signs That Your Office Needs an Electrical Upgrade

    Whether you just moved in or you’ve been working out of your office for years, having a good electrical system is important for many reasons. Keep reading to learn what signs mean that it’s time to call a commercial electrician about upgrading your office’s electrical wiring in San Jose. Recognizing the Signs That Your Office Needs an Electrical Upgrade

    You Have an Unsafe Electrical Panel

    Old and unsafe electrical panels may lead to poor electrical function, power failure, and electrical fires. Some signs that can indicate that your panel needs to be replaced include insufficient power, flickering lights, and strange sounds. Also, if your electrical panel is more than thirty years old or was made by either Federal Pacific or Zinsco, then it may be time to upgrade this part of your building’s electrical system. Finally, safety codes require that your electrical panel have sufficient clearance, have a dead front, and be readily accessible. If your electrical panel isn’t up to safety standards, then it’s time for an upgrade.

    You Don’t Have Enough Power

    Have you been dealing with tripped circuit breakers in your office? If so, then this is a good indicator that it’s time to upgrade your electrical wiring. It’s not uncommon for businesses to run into this issue as they expand and add more lighting and electrical devices to their building. If your electrical panel isn’t equipped to handle the amount of power that your office requires, then you can look forward to more tripped breakers until you upgrade the system. For this reason, you should consider having an electrician make changes that allow adequate power to reach your switches and outlets.

    You Recently Had a Safety Inspection Completed

    Finally, if you had an electrical safety inspection performed in your office and were given recommendations for upgrades, then it’s important to take this advice seriously to help ensure that your building’s wiring works properly, safely, and efficiently. Some signs that indicate it’s time for an upgrade include too few outlets and wiring that is old, cloth-insulated, ungrounded, or made from aluminum.